Akcija

-6,25%

64,00 €

60,00 €

Zaloga : 0

pri nakupu nad 1.000,00 €: prijavi se za ceno
pri nakupu nad 2.000,00 €: prijavi se za ceno

FIBARO SENZOR ZA DIM FGSS-001

SENZOR DIMA ZVOČNI IN SVETLOBNI ALARM + ZGODOVINA JAKOSTI DIMA

  • Brezžična povezava

zaloga:

Opis izdelka

 
Eye pleasing, minimalistic design
Almost all of the smoke sensors available on the market were designed with just one objective
in mind – discovering potential threats. Hardly any of the manufacturers paid any attention to
design. Naturally, smoke sensor is to save lives. However, like most of other sensors, smoke
sensor is a device installed in visible places, e.g. on ceilings. That's why our designers decided
to combine uncompromised safety with functionality and aesthetics so much appreciated by
our customers. FIBARO Smoke Sensor is a perfect sensor, a trendsetter for our competitors.
It's a device combining beauty with new technology, to protect your home and family.
   
Ultra small housing
Fibaro Smoke Sensor is probably the smallest
wireless smoke sensor in the World. Advanced
production technology allowed to significantly
minimise the sensor components, making Fibaro
sensor the most advanced device of that type
available on the market, and our company the
leader in the manufacture of wireless
smoke sensors.
  Ultimate perfection
These are the words describing Fibaro Smoke
Sensor's grille. At first glance this shiny element
may seem to be a piece of jewellery, however
it's one of the most important components of
the device. Its perforation lets the smoke into
the sensors chamber. The better made, the
smaller amount of smoke is needed to discover
threat and trigger the alarm.
 
Not only smoke sensor
Some materials burn without smoking. That's why FIBARO engineers decided to include
additional protection in FIBARO Smoke Sensor in the form of temperature sensor. If the
amount of smoke will not be enough to trigger the alarm, the device will still be able to
detect threat discovering a rapid change of temperature caused by fire. Rapid
temperature change or rise up to 54°C is enough for FIBARO Smoke Sensor
to discover threat and report household members about it.
 
One sensor, many possibilities
Designing Fibaro Smoke Sensor we did our best to foresee all possible usage scenarios,
from powering modes to compatibility with various alarm systems and wired or wireless
communication. As a result, you can install our sensor wherever you need it,
regardless of whether you can connect a power supply, walls allow for wireless
communication, or what type of wired alarm system you have.
FIBARO Smoke Sensor will satisfy all your needs.
You decide
Your intelligent home will help you protect your family from fire and other threats. You decide
what action Home Center is to take in case of fire, flood or break-in. In case of Smoke Sensor, discovering threat can result in opening roller blinds, opening garage gate and windows,
and illuminating safe escape route. You can also manually run a safety scene, performing
all life saving actions at a touch of a button in mobile phone or tablet.
 
Sensitivity calibration
FIBARO Smoke Sensor offers advanced options for configuring sensors sensitivity. Sensitivity
may be different, depending one where you install the device. In kitchen, very sensitive
sensor could trigger the alarm even when you fry some meat, that's why it should be less
sensitive, helping avoid irritating false alarms. In other rooms, where smoke presence is less
likely under normal conditions, sensor should be set to the maximum sensitivity
in order to provide the best protection.
 
High temperature resistant
Heat resistant material used to make
FIBARO Smoke Sensor's enclosure
protects the device from damage
even at 200 degrees Celsius.
 
Connection check
Correct operation of a smoke sensor is extremely important. That's why Home Center 2
polls the sensor every hour checking whether it works properly. Having discovered
any problems with communication or sensors operation, system will notify you
žimmediately, so that you could quickly react and protect your home and family.
   
Tamper prevention
FIBARO Smoke Sensor has a built-in tamper
prevention function. Any tampering with the
device or attempt to dismantle it will be
recorded and inhabitants will be notified about
it. Smoke sensor is an extremely important
element of your home safety system, that's
why any tampering with it is not allowed.
Any attempt to disconnect the power supply,
steal the sensor or any other sabotage
attempt will result in immediate reaction.
 
Z-Wave netvork
range tester

Built-in RGB LED signaling diode may be used
to signal the Z-Wave network range. Correct
communication with Home Center 2
controller is the base of well functioning
FIBARO intelligent home system.

Our sensor can communicate with an
alarm system hub by wire or wirelessly
with the Z-Wave network. Even if the
Z-Wave network range is too week to allow
direct communication with Home Center 2, each
of the system devices may repeat radio signal allowing for
installing FIBARO System components in the farthest nooks of your home.

   
Built-in tester
Faultless communication guarantees your home
safety. Smoke Sensor is a battery device, which
not only prefectly tests the Z-Wave network
range, but also performs the self-test,
informing system's main controller it's ready
to detect threats.Incredibly efficient process,
performed automatically every 5 seconds,
allows the system to monitor sensor's
operation, which you can do manually too.
  Colored information
Smoke Sensor will inform you about
its current state with a color. The
built-in LED glowing green means
the device works fine and you
are safe.
You cook, I ensure safety
Fibaro Smoke Sensor is the obligatory guest in your kitchen. Each time you prepare the
favourite meals for your family, it makes sure you don't forget to close the gas or take
a roast out of the oven. Incoming threat of fire or... burned meat will be quickly
discovered and reported for your convenience, safety, and enjoyable sunday lunch.
   
Guardian of your home
Safety of the FIBARO home inhabitants
is of top priority for us. That's why we
have designed our system from the start
to provide not only the highest comfort,
but also to make sure your family and
your belongings are safe.
 
Even the smallest amount of smoke shown in chart
So called "Black Box" implemented into Smoke Sensor records information on smoke and
temperature level. Regardless whether the alarm system is armed or not, sensor monitors
the level of smoke and sends information to the main controller periodically.
Now you are able to detect even the smallest amount of cigarette smoke.
 
History of alarms
Each of the discovered threats is recorded and stored in sensor's and main controller's
memory. All of them may be constantly monitored via mobile devices interface or
home.fibaro.com web page.
 
Automatic software update
This high-tech smoke sensor allows for fully automatic software update. Once an
update is available, providing new functionality or improving the device operation, the
sensor will automatically suggest download and will install the software without
wasting your time. Home Center 2 will make sure your Smoke Sensor's software
is always up to date, providing you the maximum safety.